Featured products

» Home » Front Load Containers » Rear Load Containers » Roll Off Containers » Hook Containers » Stationary Compactor » Self Contained Compactor » Vertical Compactor » Hoist » Recycling / Environmental

Roll Off Containers

Roll-Off Container ( download PDF)
Roll-Off Tubs ( download PDF)
Roll-Off Octagon Compaction Container ( download PDF)


    Roll-Off Container

    Standard Deck

  • 3/16” PL. Floor Sheet
  • 3” Structural Channel on 20” Centers
  • 3/16” PL. Gussets on every other Cross Member
  • 6” x 2” x 3/16” Tube One Piece Main Rail
  • Four 8” diameter x 10” LG. Heavy Duty Wheels
  • 4” OD x 6” LG Front Roller w/1½” Pin and Grease Fitting
  • 1” Certified Hook Plate (w/lifetime guarantee)
  • 1¼” Certified Plate Cable Hook (w/lifetime guarantee)
  • 1½” Plate Solid Bullnose
  • Front & Sides

  • 11 Ga. Sheet with Tie Down Bars and four Tie Down Hooks on Front
  • 11 Ga. One Piece Formed Dog House
  • 4” x 3” x 11 Ga. Top Tube
  • 11 Ga. 3” x 5” Formed 4-way Bend Side and Front Stiffener Columns on 24” Centers. Columns have notches at bottom to prevent moisture retention
  • 11 Ga. Formed Corner Post wraps around for extra strength and stability with notches at bottom to prevent moisture retention
  • Two Vertical Formed Bulkhead Stiffeners with notches at bottom to prevent moisture retention
  • Side stiffeners on 30" centers
  • Rear Corner Post

  • Latch Side 4” x 3” x 11 Ga. Tube
  • Hinge Side 3” x 8” x 3/16” Formed Stiffener 4-way Bend
  • Rear Door

  • 11 Ga. Sheet w/3” x 4” x 11 Ga. Tube Frame and 3/8” Safety Chain
  • Hinges ½” x 9” x 9” and ½” x 3” x 9” Plates with 2” OD Mechanical Tube Bushings with Grease Fittings and one 3/16” Cold Rolled Pin
  • Non-Sagging Door is designed to rest on the floor of the container
  • Tie Down Hooks ½”
  • Door Lock

  • Vertical Lift Handle System. Semiautomatic Cam Locking System with cams and Self-Aligning Keeper. The Vertical Lift Handle is securely welded to a cam style for easy operation. Handle is secured by a ¾” solid pin, 180° turn keyway locking system.

SIZE MODEL (A) HEIGHT INSIDE (B) HEIGHT OUTSIDE (C) WIDTH OVERALL (D) LENGTH OVERALL APPROX. WEIGHT
11 YD* ROT11 43” 55” 96” 12’ 9” 2,930 LBS.
15 YD* ROT15 43” 55” 96” 16’ 9” 3,680 LBS.
20 YD ROT20 43” 55” 96” 22’ 9” 4,520 LBS.
25 YD ROT25 52” 64” 96” 22’ 9” 4,850 LBS.
30 YD ROT30 62” 74” 96” 22’ 9” 5,170 LBS.
40 YD ROT40 84” 96” 96” 22’ 9” 6,040 LBS
45 YD ROT45 94” 106” 96” 22’ 9” 6,350 LBS.
45 YD ROT 45X 84” 96” 96” 24’ 9” 6,470 LBS.
50 YD ROT 50 94” 106” 96” 24’ 9” 6,890 LBS.

Back to top

    Roll-Off Tubs

    Standard Deck

  • 3/16” PL. Floor Sheet
  • 3” Structural Channel on 20” Centers
  • 3/16” PL. Gussets on every other Cross Member
  • 6” x 2” x 3/16” Tube One Piece Main Rail
  • Two 8” diameter x 10” LG. Rear and Two 8” diameter x 5”LG. Front Heavy Duty Wheels
  • 4” OD x 6” LG Front Roller w/1½” Pin and Grease Fitting
  • 1” Certified Hook Plate 6” x 15” (w/lifetime guarantee)
  • 1¼” Certified Plate Cable Hook (w/lifetime guarantee)
  • 1½” Plate Solid Bullnose
  • Front & Sides

  • 8 Ga. Sheet with Tie Down Hooks
  • 11 Ga. One Piece Formed Dog House
  • 4" x 4" x 3/16" Top Tube
  • Rear Corner Post

  • Latch Side 4” x 3” x 11 Ga. Tube
  • Hinge Side 4” x 8” x 3/16” Formed Stiffener 4 Way Bend
  • Rear Door

  • 11 Ga. Sheet w/4” x 3” x 11 Ga. Tube Frame and 3/8” Safety Chain
  • Hinges ½” x 9” x 9” and ½” x 3” x 9” Plates with 2” OD Mechanical Tube Bushings with Grease Fittings and 1-3/16” Cold Rolled Pin
  • Non-Sagging Door is designed to rest on the floor of the container
  • Door Lock

  • Vertical Lift Handle System. Semi-automatic Cam Locking System with cams and Self-Aligning Keeper. The Vertical Lift Handle is securely welded to a cam style for easy opening and closing operation. Handle is secured by a ¾” solid pin, 180° turn keyway locking system.

Item Number Container Size (A) HeightInside (B) HeightOutside (C) Width (D) DeckLength (E) OverallLength ApproximateWeight
A-788 10YD TUB 44” 56” 83” F/87” R 11’ 11’ 9” 3,060 lbs
A-442 15YD TUB 44” 56” 83” F/87” R 16’ 16’ 9” 3,750 lbs
A-4224 15YD TUB 34” 46” 83” F/87” R 22’ 22’ 9” 4,400 lbs
A-049 20YD TUB 44” 56” 83” F/87” R 22’ 22’ 9” 4,760 lbs
A-050 30YD TUB 66” 78” 83” F/87” R 22’ 22’ 9” 5,620 lbs
A-4140 40YD TUB 86” 98” 83” F/87” R 22’ 22’ 9” 6,270 lbs

Back to top

    Roll-Off Octagon Compaction Container

    Standard Deck

  • 3/16” PL. Floor Sheet
  • 3” Structural Channel on 20” Centers
  • 3/16” PL. Gussets on every other Cross Member
  • 6” x 2” x 3/16” Tube One Piece Main Rail
  • Two 8” diameter x 10” LG. Rear and Two 8” diameter x 5”LG. Front Heavy Duty Wheels
  • 4” OD x 6” LG Front Roller w/1½” Pin and Grease Fitting
  • 1” Certified Hook Plate 6” x 15” (w/lifetime guarantee)
  • 1¼” Certified Plate Cable Hook (w/lifetime guarantee)
  • 1½” Plate Solid Bullnose
  • Front & Sides

  • 7 Ga. Sheet
  • Two Fire Ports
  • 8” Taper Front to Rear
  • Two 6” Vertical Bulkhead Stiffeners
  • Rear Corner Post

  • Latch Side 4” x 3” x 3/16” Tube
  • Hinge Side 4” x 3” x 3/16” Tube
  • Rear Door

  • 11 Ga. Sheet w/4” x 3” x 11 Ga. Tube Frame and 3/8” Safety Chain
  • Hinges ½” x 7” x 9” and ½” x 3” x 9” Plates with 2” OD Mechanical Tube Bushings with Grease Fittings and 1-3/16” Cold Rolled Pin
  • Compactor Door Opening Hooks
  • Door Lock

  • Vertical Lift Handle System. Semiautomatic Cam Locking System with cams and Self- Aligning Keeper. The Vertical Lift Handle is securely welded to a cam style for easy operation. Handle is secured by a ¾” solid pin, 180° turn keyway locking system.

Container Size Height(A) OA Height Outside (B) Outside Width (C) Deck Length Overall Length(D) ApproximateWeight
21yd 90” 104” 96” 144” 153” 3,900 lbs
28yd 90” 104” 96” 192” 201” 5,160 lbs
32yd 90” 104” 96” 216” 225” 5,830 lbs
40yd 90” 104” 96” 264” 273” 7,130 lbs
42yd 94” 108” 96” 264” 273” 7,210 lbs
45yd 90” 104” 96” 288” 297” 7,465 lbs

Back to top

NOTE: OPEN TOP CONTAINERS can be stacked 5 or 6 per load. This saves freight cost per container. However, when stacking and unstacking, doors have to be removed and re-hung, and the containers may be scratched or dented. We cannot be responsible for this happening since it is unavoidable when stacking containers.

 

    Rudco Products 2009. All Rights Reserved. Website Designed by Miles Technologies. Rudco Products on Facebook      Follow Rudco Products on Twitter